The implementation of a massive show at Azadi Square Museum in Teheran, Iran, was the largest laser and multimedia project installation until that point (2004). The implementation was realized by HB-Laser.This project not only incorporated different laser show parts, but also a variety of different other media that needed to be implemented. HB-Laser provided screen as well as screen content but...
Several laser show displays lightened up the 2004 Christmas Market in Schwäbisch Gmünd: HB-Laser projected a "Laser Snow Storm" at the Christmas Market, using 8 ATLAS laser systems with Argon-Crypton White Light configuration and in addition to this 8 smaller systems with 100mW each throughout the whole Christmas Market. Graphics projections were created with a HB-Laser ZEUS RGB 500mW laser...
The "Kultturm" project was an artistic laser light installation in 2004 that established a link between the 5 culturally important ancient city wall towers of the City of Schwäbisch Gmünd, Germany. To create this optical effect, HB-Laser used a strong LightCube laser show system with 10W power and a Jenoptik JenLas disc laser source.   jsnThemeGridjQuery(function()...
A multi media projection towards the Schwäbisch Gmünd Münster was implemented by HB-Laser in 2004. HB-Laser supplied lasers as well as lighting setup and mutli-media control. Laser projectiosn were done with a Coherent Enterprise gas laser system on HB-Laser ATLAS base (1.5W) and an HB-Laser ZEUS 500mW single green system. Several moving heads and wash lights created ambient lighting effects....
The Seefest in Augsburg, Germany, is an annual event in the bavarian city of Augsburg. In 2003 the organizers decided to go for a professional high power outdoor laser show. To achieve a great long distance visibility of the beams, HB-Laser decided to go for a powerful Spectra-Physics 171 Argon laser system with ca. 30W power, based on an HB-Laser ATLAS platform  
First test projections with a 10W green Lightcube System with new DPSS laser sources - which was very new at those days. This happened in August 2001 - HB-Laser was always driving development and searched for new technologies and solutions. This 10W green outdoor laser test shows the latest technological achievements in the field of solid state laser development in those...
In 2009 HB-Laser equipped three cruise ships of Costa Cruises - the Costa Luminosa, the Costa Pacifica and the Costa Deliciosa - with high profile multi media and laser shows. No ship is like the other, so every show needed to be set up and configured individually. The challenge for laser show installations on cruise ships are the continuous vibrations of the ship when travelling. This usually...
The Gan Hashikmim Wedding Hall in Israel requested a strong laser show setup, but the implementation of the system on site was quite a challenge: Due to the building mainly consisting of windows, there was hardly a possibility to reduce the environmental illumination, even at night. We managed to get the show going anyway, and the professional ATLAS 2000 gas laser system did/does a great...
The illumination and media artist Walter Giers set up a laser art installation at the occasion of the "Staufer Event" in 2011, the anniversary of the house of the Staufer Kings. The laser beams were set up to create a laser-delta to highlight the ancient castles of the former Staufer Kings.   Walter Giers relied on this technology for his laser art installation: 4 x HB-Laser LightCube...
Monkeys climbing a building - Stefan Reusse created an artistic project where monkeys were projected towards buildings, "jumping" from one to the other building or just hanging around. HB-Laser used a LightCube G 5W for this artistic project      jsnThemeGridjQuery(function()...
The artist Bettina Nuschei created special reliefs that were illuminated with laser light to visualize the embossment of the relief structure. The effect was created with light-section with one blue 1W laser diode and a red 500mW laser diode.   jsnThemeGridjQuery(function()...
For the event of the 8th Art Festival in Wuhan, China, the organizers requested 3D-like beam effects on stage to support the artistic performances and displays there. So HB-Laser provided three LightCube NexGen RGB 10W laser show systems and synchronized the laser show to the other multi media part via time code with the TITAN 5 multi media control station and Pangolin...