|
Projection-screen of water Among projection screens of fabrics or foils screens made out of water have become more and
more popular in the event industry. Wear-resistance and barely visible technical structures are
the most important advantages of these systems. Unforgettable events and unique presentations
Vertical water screens can be created in two different ways
A fountain based water screen is normally used at outdoor
events. Under high pressure water runs through nozzles
mounted in water basins.
Water screens based on waterfall principle are applied at
indoor events. A line of fine drops builds a nearly invisible
vale of water. The size of these screens is only limited by
the room’s dimensions. This enables
projections which seem to float free in space. An effect,
supported by the water curtain’s transparency.
| Anwendungen
■ Hotels
■ Amusement parks
■ Discotheques
■ Theaters
■ Museums
■ Trade shows
■ Billboards
■ Special effects |
Neptun Serie 
Neptun Hydroshield 10 × 27 m
Creates a semicircular hydro screen for laser and video projection,
approx. 10 m high and approx. 27 m width.
The water fluctuation is approximately 80 m3 per hour. Neptun Hydroshield 17 × 45 m
Hydro-shield for large-scale outdoor-projections.
Perfect for video and/or laser back-projections, for
image-sizes up to 20 × 15 meters.
Sea water-resistant stainless-steel.
The water fluctuation is approximately 180 m3 per hour. Neptun Hydroshield
2 m stainless steal segment with 4 nozzles in a 50 cm distance.
Each nozzle generates a thin water wall of approx. 3 - 5 m height
(depending on wind) and 50 cm width. Due to the overlapping of
the water walls a homogeneous water wall of approx. 2 × 4 m
is generated. Neptun Hydroshield Outdoor
Creates a semicircle water wall of up to 20 m high and 50 m wide.
It is easy to assemble as it can be directly connected to a hydrand
or water pump. The water flow of these systems is up to 3500 l/min
at a pressure of 16 bar. Neptun
Hydro screen technology for Laser, Video, Light and Slides.
Hydro shield for outdoor applications with sizes up to 17 × 45 m. Poseidon Serie 
Poseidon Hydroscreen 110
Hydro screen segments with one GK water connector for water
inlet and a single row of brass nozzles for the water outlet.
The water fluctuation is approximately 80 l/min referred to a
segment length of 4 m. Poseidon Hydroscreen 220
Hydro screen segments with two shifted rows of brass nozzles
for the water outlet. The water flow is approximately 160 l/min
referred to a segment length of 4 m. Poseidon Hydroscreen 330
Hydro screen segments with three shifted rows of brass nozzles for
the water outlet. The water flow is approximately 240 l/min referred
to a segment length of 4 m. Upgrade Poseidon Hydroscreen Professional
Hydro screen segments with mounts for the fitting of several
segments as well as valves for the quick draining of the segments.
Double sided GK water connectors on both ends and brass nozzles
reaching to the end of the segment. Poseidon Hydroscreen
Consists of extruded aluminium profiles (pat. pend.) which are
supplied by multiphase centrifugal pumps with a flow of up to
160 l/min. We supply customised lengths of up to six meters.
Wider projection areas can be realized by arranging several
segments to make any desired size possible.
Optionally, we offer a version with double or triple shifted
rows of nozzles. Due to the higher density of the water curtain
these versions are optimized for projections with lasers,
slides or videos.
Of course we also deliver special versions like bows or
corner segments.
Poseidon- Hydroscreen technology for laser, video, light
and slides. Water curtain for indoor applications.
Scalable – with no size limitations.
|
nach oben